The Smart Water Meter Plastic Shell is a broad concept with variety of types. Designed to be suitable for use in various environments and different groups of people, there are many types available. Classified by their internal structures, they can be divided into single-jet water meters and multi-jet water meters. This smart water meter plastic shell is specially designed and suitable for multi-jet water meters, with a targeted structural design to match the operating characteristics of multi-jet water meter cores, ensuring stable fit and reliable protection.
| Voltage | 3.6V | Operable voltage | 2.5-5V |
| Locked-rotor current | 550mA | Operating Current | ≤30mA |
| On (Off) Time | ≤16s(3500:1) | Output Torque | ≥2.5N.m(3500:1) |
| On (Off) Time | ≤30s(6200:1) | Output Torque | ≥4N.m(6200:1) |
| Reduction ratio | 3500:1,6200:1 | Waterproof rating | IP67 |
Angle control is achieved using the through-beam holes of a through-beam photoelectric switch sensor, with approximately 135 gear positions available within a 90-degree stroke.
The fully open and fully closed positions can be customized according to customer requirements.
I: Yellow (open or close valve)
II. White (COM)
III: Blue (open or close valve)
IV: Red (positive)
V: Black (negative)
| Wire color | Label | Description |
| Red | Data | Signal Line |
| Purple | Voltage | Power Line |
| Grey | GND | Ground |
What is the working temperature range of this shell? Can it adapt to cold and high temperature areas?
The Water Meter Electric Actuator Shell is made of temperature-resistant modified engineering plastic, supporting a wide working temperature range, adapting to conventional cold, mild high temperature and humid environments, avoiding performance failure caused by extreme temperature changes. It can stably adapt to most domestic and overseas water meter installation environments, including northern low-temperature areas and southern high-humidity high-temperature areas.
Do you support mold customization and batch production for this actuator shell?
Yes. With 30 years of smart water meter accessory production experience, we have professional mold development and mass production capacity. In addition to the standard KY-KT-23 model, we can customize the shell size, interface position, sealing structure and appearance according to customer exclusive actuator models, and support large-scale stable batch supply to meet long-term cooperative procurement needs.
Address
No. 25, Huancheng West Road, Zhangqi Town, Cixi City, Ningbo, Zhejiang Province, China
Tel
