1. Structural Fixation
Water meter valve actuator shell integrates the actuator by housing gear motors, valve cores, transmission gears and other components.
2. Protection and Sealing
Water meter valve actuator shell is waterproof, dustproof and leakproof, adapting to humid environments and tap water immersion, ensuring stable operation of internal circuits and motors.
3. Functional Support
Working with gear motors, water meter valve actuator shell realizes remote control such as valve opening, valve closing and flow limiting, serving as a key structural part for the valve control function of smart water meters
| Voltage | 24V | Operable voltage | 23-25V |
| Locked-rotor current | 450mA | Operating Current | ≤80mA |
| On (Off) Time | ≤10s(2400:1) | Output Torque | ≥1.8N.m(2400:1) |
| On (Off) Time | ≤16s(3700:1) | Output Torque | ≥2.7N.m(3700:1) |
| Reduction ratio | 2400:1,3700:1 | Waterproof rating | IP66 |
The fully open and fully closed positions can be customized according to customer requirements.
I: Position Switch Signal, open valve
II. COM
III: Position Switch Signal, close valve
IV: positive
V: negative
1. Power Cable
2. Water Leak Alarm Cable
1. Touch the upper circular area (marked "ON") to open the valve.
2. Touch the upper circular area (marked "OFF") to close the valve.
3. When water comes into contact with the water leak alarm, the valve will close and the alarm light will turn red.
Address
No. 25, Huancheng West Road, Zhangqi Town, Cixi City, Ningbo, Zhejiang Province, China
Tel
